分享到:0
  • Find Us On:
  • Facebook
  • Twitter
  • Tencent
  • Sina
Home | Feedback | Sitemap
English中文عربيEspañaрусский

Hotline: 400-1185-777

Blow Molding Machine
Home » 产品展示 > Blow Molding Machine

Upper billet system

-The conveyor belt lifts the preforms from the hopper and feeds them to the entire machine. The preforms are automatically arranged by the blank slides.

-The blank jaws take the preform onto the revolution slider.

-The compacting device ensures the reliability of the upper billet, transports the preform, and reduces the billet down time.

Heating system

-Reasonable ventilation cooling system can fully guarantee the heating of the preform and the cooling of the container mouth.

-PLC independent section temperature control, drying the world is reasonable, can be flipped, and reliable up and down.

-The preform has a small heating center distance, and the heating speed is fast. It is 40% more energy-saving than ordinary heating systems.

-The preform enters the oven and the bottleneck is upwards. Due to the efficient oven cooling and ventilation system, the bottleneck and the shaft are not overheated. The preform surface, even thick preforms, and high-productivity products are well cooled and avoided. Crystallization.

-In order to ensure the blowing rate, the oven is in a very important position in measuring the performance of the machine. The oven structure of the machine adopts the most advanced infrared radiation heating energy-saving technology, and the temperature control adopts automatic negative feedback and closed-loop adjustment mode.

Clamping mechanism

-The clamping mechanism adopts a five-point double crank arm clamping mechanism, which optimizes the design and has a large clamping force and a high speed.

-The revolution slider sends the heated preform to the mold by servo drive.

-After heating, the preform leaves the oven and is sent to the blow mold by a servo motor.

The integral air valve is used for pre-blowing, blowing and removal, so ensure rapid, accurate and repeat adjustments of the blowing equipment, taking into account the flexibility of the blowing process.

Change mold

The giant light blow molder is quick and easy to change the mold. There is an area in front of the machine to change the mold. There is a simple roller on it to take out the whole mold (for 2-8 chambers, small and large containers).

Bottle-out device

The bottle-blanket connecting mechanism is installed at the bottle-blowing place, and it is connected with the air-sending chute, and the molding vessel is directly conveyed to the filling system.

Add:No.1 Nanhui Rd.,Nancheng Street.Huangyan,Taizhou,China.
Tel: 86-576-84220707 Fax: 0086-576-84220707 Mob: 0086-13757679308Email: sale@jg-machinery.com  654729565@qq.com
Copyright © 2012 Zhejiang Huangyan Juguang Plastics Machine & Mould Industry Co.,Ltd All Rights Reserved. Power by:imould